Overview. The Arborcoat Exterior Stain – Semi Solid provides colour and protection for your wood surfaces while still allowing the grain surface to show. This stain is perfect for softwoods such as cedar and pine, but is also suitable for all types of wooden decking, siding and furniture.

The lifespan for Arborcoat exterior stains can vary widely based on the type of wood, amount of sun exposure, moisture exposure, product type, and the local climate. The average stain lasts 3-6 years.

Arborcoat® Classic Oil Semi-Transparent Stain is a deeply penetrating wood finish that offers excellent protection from water, sun, and.

ARBORCOAT stain is self-priming and self-sealing. So, once you have decided on a color, you only need to apply 1-2 coats for the desired effect. Two coats will provide optimal performance on bare wood surfaces. Coats can be reapplied after 3-4 hours or when the wood is dry.

The main difference between paint and stain is that paint lies on the surface of the item being painted, whereas stain is absorbed into it. Here are some pros and cons of both paint and stain. Paint: Paint is thicker than stain, so generally needs fewer coats.

The main difference between paint and stain is that paint sits on top of the surface rather than seeping into the surface. Paint also needs to be painted onto surfaces that have been primed first, while stain does not need a primer.

Like regular stain, solid stain is designed to change the colour of a surface while still allowing the texture of the wood to show through. Solid stain is in the middle ground between paint and regular or semi-transparent stain in that it seeps into wood more than paint, but not as much as regular stain.

Types of Wood Stains Solid wood stains: Just like regular paint, solid stains hide the grain of the wood, and the best should last three to five years on a deck, the longest of the three types of stains.

If it rains immediately after you've stained the wood, the stain will peel and flake off. It rained when it wasn't supposed to!

This 100% acrylic formula seals out the elements, and the sun's harmful UV rays, for up to 10 yrs. on decks and up to 25 yrs. on fences and siding.

Yes, each layer will darken your project even more. You can also start with a lighter color Gel Stain and layer on darker colors.

If the first layer of stain looks perfect, then great! You do not need to add a second layer. You should reserve adding a second layer only if you want a darker color for the stain. However, many times, the first layer of stain will suffice for both adequate protection and the desired color.