If the oxygen concentrator is not turning on:

1. Turn the device on by pressing the power button twice.
2. Make sure all the cords are connected properly.
3. Check for any wire damage.
4. The power supply adapter should be well-ventilated.

And at eye. Level turn the knob to center the ball onto the line of the prescribed leader flow per year provider. Here you can see the ball is exactly in the center of two liters.

Do not self adjust your oxygen flow rate without consulting your doctor. You can use a nasal cannula connected with a hose of up to 50 feet around your home be careful when you're walking.

A Y-connector can be used to merge oxygen flow from two concentrators to obtain a higher flow rate which could be given to a single patient. Important points to keep in mind when using a Y connector: • Choose two concentrators with similar outlet pressure, and with desired combined flow output.

Press and hold the light button for 10 seconds and screen will display “sieve reset”. Release button once message is displayed on screen. Press the bell button once and screen will display “sieve reset successful”. Press the power button to turn on the OxyGo, and use normally.

Power Controls for The Oxygen Concentrator Each unit has a power switch to turn the unit on or off that's located on the front panel. Almost all units are equipped with a circuit breaker or reset button. In most units, the circuit breaker is a white button located near the power switch.

Oxygen concentrator can be kept anywhere inside the house; but while operating, it should be kept one feet away from the walls, bed, sofa, etc. There should be 1-2 ft.

Concentrator Placement The concentrator should be centrally located in the home. It should be kept away from radiators, heaters or hot air vents. Keep concentrator at least six inches from the wall, drapes or furniture. Make sure the concentrator is off before you plug it into an outlet.

No. You can use an oxygen concentrator without water. However, while oxygen humidifier bottles are not required, they will make oxygen delivery more comfortable.

Oxygen concentrators are medical devices that help you take in oxygen if you have a condition that affects your lungs. You may also benefit from using an oxygen concentrator if you spend time in a high-altitude area. Whether you're using it every day or just sometimes, it may take some time to get comfortable.

This guide created by MSF demonstrates how to connect two oxygen concentrators (portable pressure swing adsoprtion - PSA) to double flow delivery to a patient.

When there are multiple patients requiring oxygen therapy but there are a limited number of oxygen concentrators, an oxygen flow splitter is recommended. The flow splitter is connected to the oxygen concentrator and can divide the supplied oxygen amongst a maximum of 5 different patients.