Lithium-ion Xtreme Technology Lithium-ion Xtreme Technology.

Product Specifications

The LXT range, or LXT tools, uses 18V batteries. This range also offers tools using 36V but powered by two 18V batteries. The LXT brushless products are very durable, and they are considered the best in the world.

Makita Corporation (株式会社マキタ, kabushiki gaisha Makita) (TYO: 6586) is a Japanese manufacturer of power tools. Founded on March 21, 1915, it is based in Anjō, Japan and operates factories in Brazil, China, Japan, Mexico, Romania, the United Kingdom, Germany, United Arab Emirates, Thailand, Canada, and the United States.

The most common gear diameters currently in use, as of this writing are 2.5″, 3.5″, 4″, 4.5″, 5″, 5.5″, 6″, 7″, 8″, 9″, 10″, 12″, 14″, 16″, 18″, 20″ and 36″. For a quick check of a unit's size and displacement, the above guidelines should help with your blower identification.

Direct drive blowers are also high pressure but low volume blowers having 50 mm to 915 mm wg pressure and 500 CFM to 15,000 CFM volume capacity which are used for high pressure, some times are called air booster.

Makita Corporation (株式会社マキタ, kabushiki gaisha Makita) (TYO: 6586) is a Japanese manufacturer of power tools. Founded on March 21, 1915, it is based in Anjō, Japan and operates factories in Brazil, China, Japan, Mexico, Romania, the United Kingdom, Germany, United Arab Emirates, Thailand, Canada, and the United States.

Makita vs DeWalt summary On the whole, if price and comfort is a big deal to you, then it'll be Makita. Whereas if you value power and warranty protection, then DeWalt is the right choice.

In general, Makita has a reputation for being a step up in quality compared to DeWalt with a higher price tag to go along with it. However, both brands are considered to be professional-level tools across the board.

TO MEASURE A BLOWER WHEEL: FIRST MEASURE THE DIAMETER, SECOND MEASURE THE LENGTH. ROTATION IS DETERMINED BY THE WAY IT SPINS WHILE LOOKING AT THE MOUNTING HUB.

The most common sizes for residential blower motors are 1/4 horsepower, 1/3 horsepower and 1/2 horsepower.

Selection of Centrifugal Air Blowers Specifications

1. Air flow rate required by the process in m3/Hr. or CFM (cubic feet/ min.)
2. Static pressure as offered by the ducting. In inches/ mm of wc.
3. Temperature at which Air enters into the blower.
4. Application for which centrifugal fans & blower is required.