The XHose holds up to 500 PSI, and when filled with water flowing, the hose had some pliability and its spray was less powerful than the zero-G hose. The XHose does not come with a sprayer, so you'll need to purchase one separately.

This means that the hose reel can withstand a maximum pressure of 18 bar without bursting, but it is designed to operate at a pressure of 12 bar. The minimum pressure for a hose reel is typically 2 bar, which is the minimum pressure required to ensure that the water flows freely from the hose.

Rubber hydraulic hoses are usually made of nitrile rubber since it's compatible with most hydraulic fluids. Rubber hoses can either have textile braid for lower pressure applications under 1,000 psi, or high tensile steel wire for pressures up to 7,000 psi and beyond. The wire reinforced variety is the most common.

Minimum number of fire hose reels: The standard requires at least one fire hose reel for every 500 square meters of floor area or part thereof. Distance between fire hose reels: Fire hose reels should be spaced no more than 50 meters apart in a straight line and should be located within 4 meters of an exit.

36 metres Standard fire hose reels are 36 metres in length and can provide a jet of water up to 10 meters. The 36M hose enables the user to fight a fire in various location of the site and the long water jet ensures a safe distance between the person using the hose reel and the fire.

1000 psi to 3000 psi The most common range for industrial presses is 1000 psi to 3000 psi.

Hydraulic fluid injection occurs when a stream of hydraulic fluid, under as little as 100 psi, penetrates your skin. It can occur with other fluids, such as water, diesel, or paint, but the issue is the same: a fluid at high pressure pierces your skin and become trapped underneath.

4m The length of hose allowed for this calculation is a maximum of 36m, with a spray range of 4m from the nozzle, and it is the system coverage that determines whether internal hydrants are necessary. To comply with regulations, fire hose reels must be located within 4m of an exit.

If your lawn is 500-2,000 sq ft, we recommend going with a 50' long hose. If you have a bigger lawn, 2,000-5,000 sq ft, the ideal hose will be 75' - 100' long. For odd-shaped lawns that require more flexibility, consider buying two shorter hoses and a connector to shorten or extend the length as needed.

The length of your hose can seriously affect the garden hose flow rate, as the longer the hose, the less water pressure there will be. This is because as water travels down the hose, it can lose pressure and offer far less flow rate. If you need a longer hose, then it will likely be worth having a smaller diameter.

The user applies pressure by hand, using a handle to pump pressure into the hydraulic fluid system. This pressure is transferred to a secondary area and the resulting force can be as great as 25 tons.

The maximum pressure at the outlet can reach 3200PSI/22MPa with your double-acting cylinder can easily lift at least 5 tons of weight. 【Double Acting Hydraulic Power Units】This double-acting hydraulic pump must be used with a double-acting cylinder.