Using a forward and backward motion continue to move the mop slowly. And evenly over the areas you'd like sanitized. With the steam. And scrub shark's got your whole home covered.

Is it filled up to the maximum fill line. If not fill it up and try. Again. If the tank is filled up make sure the cap is screwed on tightly. If it's not the steam mop won't heat up or blow Steam.

Check if the mop is properly plugged into the outlet and turned on. If it is on and still not functioning, try resetting the mop by plugging it into a different outlet. Add water to the tank if it is empty then try selecting the 'STEAM' setting once more.

The SteamPocket Mop requires water in order to make steam. Check to see if there is water in the water tank. If there isn't, unscrew the water tank cap and use the filling flask to pour distilled water into the tank until it reaches the fill line. Replace the water tank cap and tighten.

It's worth the money because you're not using any additional cleaning products - all you need is water, and the steam power does the rest. However, you can add a small amount of cleaning solution to the water reservoir to aid in the cleaning process.

A steam mop is an effective tool for killing germs and bacteria without using harsh chemicals. These appliances can remove stains, get rid of grime, and deep clean your floors with little effort on your part. Plus, no mop bucket or hands-and-knees scrubbing is required - what more you could ask for?

Often a simple solution to this is to remove the bottle and pour warm water directly into the cavity. Then, spray a few times and see if water sprays out. If the issue is fixed simply re-insert the bottle and continue use.

How to Clean a Steamer With Vinegar

1. Unplug and Empty the Water Tank. If you've just used the steamer, unplug it and allow it to cool.
2. Fill the Tank With Vinegar.
3. Turn on the Steamer.
4. Expel the Vinegar.
5. Fill the Tank With Distilled Water.
6. Expel the Water.
7. Cool and Dry the Steamer.

A common cause to your cleaner not producing steam can be a failed heating element. As the heater is used to heat up the water, if that has ruptured or burnt out your steam cleaner will not produce any steam. With the water tank filled and switched on the steamer should sound like a boiling kettle.

Using a paper clip clear any build-up in the tip of the wand or handheld pod. The steam level may not be selected. Select the steam level by pushing either the low or high level steam. Button.

Make sure you have water in the tank so you can see whether or not it is dripping. And finally, check the cap on the water tank to make sure it is not cracked and that the rubber gasket at the tip of it is still attached. Check to see if the foot of the steam mop is properly installed.

Turn your Shark Floor & Handheld Steam Cleaner into a garment steamer with this accessory. Ideal for removing creases and wrinkles from clothing, and for freshening upholstery. Always test on a small, inconspicuous area. PLEASE NOTE: Garment Steamer Pads sold separately.