Mothers CMX Ceramic Surface Prep is the perfect product to prepare your vehicle for a ceramic coating. Proper surface prep before applying any ceramic coating, sealant or wax is paramount to ensure optimal adhesion and a lasting bond.

Adam's Surface Prep (4oz) - A Cleaner That Ensures Your Paint is Clean & Ready to Apply Any 9H Top Coat Ceramic Coating After Clay Bar, Car Wash & Orbital Polisher Treatment.

And spread evenly and thoroughly over a wet or dry surface. You'll notice that it will actually start to disappear.

Mothers ® CMX ® Ceramic Spray Coating is an affordable, user-friendly, ultra-durable, super-hydrophobic protection formula. Just spray on and wipe off, with this game-changing SiO2 (Silicon Dioxide) and TiO2 (Titanium Dioxide) blend.

Simply spray on and wipe off, CMX ® Surface Prep will do the rest, quickly flashing off, leaving a perfectly clean, residue-free and anti-static/dust-resistant surface, ready for coating.

This safe but effective, pH neutral cleaner is so versatile it can be used on virtually every exterior surface of your vehicle, including paint, glass, trim, wheels, tires and more. It can also be safely used in body shop environments thanks to its silicone-free formula.

EVERY 3-4 MONTHS EVERY 3-4 MONTHS - Seasonal Ceramic Coating Maintenance After a maintenance wash using your pH-neutral soap, apply a spray sealant as a coating topper to enhance and rejuvenate the protection, appearance, and performance benefits of your graphene or ceramic coating.

24 hours Use as a stand-alone product, or as a booster over your existing sealant or ceramic coating. Washing and caring for your vehicle has never been easier. Cures in 24 hours (do not get vehicle wet during curing period).

Is it a ceramic and wax hybrid blend? No. CMX ® Ceramic Spray Coating is a true ceramic coating, featuring both Si02 & Ti02 nano-quartz technology. There is no wax, natural or synthetic, in the formula.

Environments thanks to its silicone free formula.

Some high-end packages use many layers of ceramic coatings. It is a gimmick for many of these packages, in any case. Yes, it is possible to have too much ceramic coating. After a certain point, subsequent layers cease to adhere, resulting in product waste and overcharging clients.

around 24 hours Ceramic coatings need to cure for around 24 hours before being exposed to rain. Your car will need to be garaged overnight unless the weather forecast is for no rain. No garage or carport?

CAN I DRIVE MY CAR AFTER CERAMIC COATING? Yes, it's okay to drive your car starting about 24 hours after application. Avoid any water from touching the surfaces of the vehicle for the first 24 hours after application (sprinklers, rain, car washes, etc.)

If a ceramic coating gets wet after it has been applied, whether with rainfall or tap water, contaminants will prevent the formation of crosslinks before the bonds have had time to develop and completely bind.

And the wheels. Back up to the top of the car. And that leads to the fourth mistake drying the car improperly. So if you're somebody that likes to grab an old beach towel.

However, there are also some potential drawbacks to consider before you make the decision to ceramic coat your car. Here are a few of the cons of ceramic coating: It's not a permanent solution. Ceramic coating will eventually wear off, so you'll need to have it reapplied every few years to maintain the protection.