What is Lucas Oil Synthetic Blend Marine 2-Cycle Oil?
Lucas Oil Synthetic Blend Marine 2-Cycle Oil is a high-quality oil designed to provide maximum protection and performance for two-stroke marine engines. It is specifically formulated with a synthetic blend of highly refined base oils and a specially designed additive package to provide superior lubrication, reduce wear and tear, and prolong the life of your engine.
This marine oil has been designed to meet or exceed the requirements of all leading manufacturers of two-stroke marine engines. It contains powerful detergents and dispersants to maintain engine cleanliness, prevent rust and corrosion, and reduce exhaust smoke. Its unique ashless formula is also environmentally friendly, making it safe for aquatic life.
One of the key benefits of using Lucas Oil Synthetic Blend Marine 2-Cycle Oil is its ability to withstand the harsh marine environment, including saltwater corrosion and dampness. Unlike conventional oils, it has excellent water resistance to help prevent the formation of harmful deposits in the engine. It also has a low-ash content, which means it provides clean-burning combustion, reduces deposits and emissions, and protects against pre-ignition.
Another advantage of Lucas Oil Synthetic Blend Marine 2-Cycle Oil is its excellent mixability, which allows it to mix easily with fuel and provide excellent performance at any temperature. It also provides excellent film strength, which allows it to lubricate metal surfaces even under extreme operating conditions.
Overall, if you are looking for a premium oil that can help protect your two-stroke marine engine, reduce emissions, and improve performance, Lucas Oil Synthetic Blend Marine 2-Cycle Oil is an excellent choice. It is available at most marine supply stores and comes in a range of sizes to suit your needs.
Frequently Asked Questions about lucas oil synthetic blend marine 2-cycle oil
Lucas High Performance Semi-Synthetic 2-Cycle Oil has been specifically developed to give a long trouble-free life to gasoline-powered 2-cycle engines. Designed for any oil injection system or pre mix up to 50:1. Use in Snowmobiles, Weed Eaters, Leaf Blowers, Chain Saws and more.
2-Cycle Engine Oil is a premium synthetic blend that is fully compatible with low octane, oxygenated/gasohol fuels. It will provide outstanding anti-scuff, anti-wear, rust and corrosion protection and it burns cleanly and helps keep port clear for maximum output.
But could be used in a diesel. Application using a 1540 to help reduce temperature extend oil drain intervals. And just make yourself a more high performance motor oil simply pop your hood.
The perfect companion for small engines – Lucas 2-Cycle Oils ensure optimal performance in motorcycles, ATVs, karts, watercraft, outboard motors, lawn equipment, and additional two-stroke engines providing superior lubrication, reducing smoke, and extending the life of equipment overall.
A: Use it in new engines after your factory recommended break in period. Put in a quart each time you change the oil in your car. You should be able to go at least 50% longer between oil changes and your engine will last much, much longer.
Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.
5,000 to 7,500 miles
Full synthetic will need to be changed every 10,000 to 15,000 miles depending on your vehicle. While synthetic blend needs to be changed every 5,000 to 7,500 miles. So synthetic may be more expensive, but it is often worth it as it offers better protection and will last longer.
Synthetics have some advantages over conventional motor oil. They're designed to be more effective at: Resisting oil breakdown, which makes it last longer than conventional oil. Withstanding higher temperatures than conventional oil, which helps keep engines running longer.
Directions For Use
Add directly to fuel tank. Add to 2-Stroke Fuel - Add 1 ounce per gallon of pre-mixed fuel. Add to Engine Oil - Add 1 ounce only per quart of engine oil. May be added with oil change or between oil changes.
The shelf life is indefinite. However, the oil standards have changed over the years; two stoke oil has gotten better and better. 5 - 6 year old oil will be just fine though in a conventional two stroke outboard.
Lucas Heavy Duty Oil Stabilizer is a 100% petroleum product that was developed to protect against rust and corrosion, eliminate dry starts, lower oil temperature by reducing friction, and extend oil life in any engine – gasoline, diesel or high performance.
The recommended dosage is 2-3 ounces of Fuel Treatment for every 10 gallons of gasoline or diesel fuel. Pour Lucas Fuel Treatment directly into fuel tank. Exceeding the recommended dosage is not harmful to your vehicle. 5.25oz Bottle - One bottle treats up to 25 gallons of fuel.
A few disadvantages of synthetic oil to be aware of include: Probably the most glaring downside of synthetic oil is the cost. The price of synthetic oil is around two to four times the price of conventional oil. Synthetics may be more prone to additives precipitation during cold storage conditions.
On the positive side, synthetic blend oil provides better performance and protection than conventional oil, particularly in extreme temperatures and heavy loads. It also contains fewer impurities, which can help improve longevity and reduce engine wear.
Pour Lucas Fuel Treatment directly into fuel tank. Exceeding the recommended dosage is not harmful to your vehicle. 5.25oz Bottle - One bottle treats up to 25 gallons of fuel. 1 Quart/32oz Bottle - One bottle treats up to 100 gallons of fuel.
Excess oil can produce a smoky exhaust, oil leaking out of the muffler, and sometimes loss of power. While not ideal, these issues can be fixed by simply replacing the fuel in the tank with properly mixed fuel. But running a two-cycle engine with too little oil can actually destroy the unit.
