On a cool dry wheel in a well ventilated. Area spray sonax wheel cleaner plus holding the bottle six to eight inches from the wheel surface. The product is ready to use with no dilution necessary.

A ready-to-use, VOC compliant, phosphate-free, acid wheel cleaner formulated to safely remove brake dust and heavy road film from most wheel types.

Yes, Sonax Wheel Cleaner is safe for painted wheels. Due to the formulation of this product, it's both safe and effective to use on painted wheels. Additionally, this product is also safe to use on clear-coated wheels.

These cleaners usually consist of strong acids such as phosphoric, hydrochloric, sulfuric, oxalic, acetic, hydroxyacetic, hydrofluoric, and citric acids, as well as blends of the various acids. These products are not very effective in removing road soils from wheels.

Step 1: Wheels should be cool to the touch. If the vehicle was recently driven, rinse wheels first with cold water. Step 2: Spray wheel and on all areas to be cleaned. Allow 30 – 40 seconds for the product to penetrate dirt and brake dust.

However, using wheel cleaner on wet wheels can also dilute the product, making it less effective. Using wheel cleaner on dry wheels can be more effective at removing tough grime and stains. It allows the cleaner to cling to the surface of the wheel and penetrate deeply into the dirt and grime.

about every two weeks Wheels should be cleaned on a regular basis; about every two weeks. Always clean the wheels during regular car washing routines. Driving habits and driving conditions can vary so adjust accordingly. City “stop and go” traffic will generate the most brake dust and wheel cleaning challenges.

Many acidic wheel cleaners on the market may seem strong, but they can actually be too aggressive and potentially stain or discolor your wheels. That's why we highly recommend using TUGA's effective acid-free wheel cleaner. It has been tested on various wheel finishes and proven to be safe and reliable.

Not unless you leave the wheel cleaner on for an excessive amount of time, which adds a slight possibility of rotor stains. In general, you don't have to worry about wheel cleaner damaging your brake system.

Can You Use Wheel Cleaner on Car Paint? That would not be a good idea. Most wheel cleaners are highly acidic substances, that are intended to be used on solid metals as opposed to clear coated paint applied on metals. The low pH levels in wheel cleaners works by dissolving brake dust and contaminants.

POWER CLEAN WHEEL ACID is a blend of hydrofluoric and phosphoric acids and several surfactants. This concentrated product is an etching wheel cleaner. Use POWER CLEAN WHEEL ACID to remove rust, brake dust, dirt and grime.

The risk of staining or pitting your wheels does increase if wheel cleaner is left on too long, but an extra 15 minutes won't hurt.

Washing all the wheels at the same time But when you attempt to wet all of the wheels at once with wheel cleaner, inevitably the cleaner will dry before you have a chance to rinse it off. That can lead to streaking – and more work. The same principle works for your tires.

We recommend a decontaminator, such as Sonax Wheel Cleaner. Spray this wheel-specific cleaner on a cool, dry wheel and wait 10 minutes or so. Though the product sprays on clear, its color changes from clear to red as its chemicals interact with the iron molecules in the brake dust.

A vehicle that's maintained regularly should be ok with just soap and water for the wheels. I used to use separate tire and wheel cleaner every time I washed my vehicle. I started using the wash soap and a mitt on my wheels and they seem to stay cleaner longer, don't get scratched as bad, and seem to shine better.

Myth 2: Wheel Acid Removes Water Spots. However, incorrectly used heavy-duty degreasers and acidic washes can dull and corrode the painted surface.