WeatherTech Side Window Deflectors Handcrafted from the finest 3mm acrylic material available, these low profile wind deflectors reduce wind noise while driving. In addition, you'll be able to enjoy air to circulate through your vehicle while your windows are open slightly during inclement weather.

A window deflector is mounted above the doors of some automobiles, to protect the inside of the car from rain or other precipitation in case of slightly opened windows. Deflectors may also be fitted to sunroofs to change the flow of air.

What are they made from? Wind Deflectors are precision made to the highest standards using cast acrylic.

Side Window Deflectors also help reduce wind noise and allow interior heat to escape. Fresh air enjoyment with an original equipment look, your deflectors are crafted from the finest 3mm acrylic material available. Installation is quick and easy, with no exterior tape needed.

Our tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. (U.S. Department of Transportation) approved glazing material. Designed and Engineered in USA – Handcrafted in Germany.

Air vent deflectors unblock the air in a room. Many times air gets stuck behind furniture, curtains, and appliances or under a sofa. The deflector works by unblocking the air that is stuck and improving the airflow in the room.

Car door visors shield the driver and passengers from the side sun and also from the water droplets during the rainy season, which can be distracting. A wind deflector built into the door visor is an excellent way to reduce wind noise inside the car, especially when driving at high speeds.

Automotive weather stripping is the rubber material that forms a seal around your vehicle's doors, windows, trunk lid, windshield, and other areas, such as the roof rails. Depending on the location, the seal might have an O or U shape. Window sweep seals, called beltlines, have a felt-like edge to help keep out debris.

Using a rain guard offers an aerodynamically-engineered way to reduce wind noise, as wind is routed alongside the exterior of your vehicle as you drive by the sleek styling of the rain guard.

America That's why you can trust that your WeatherTech purchase will always come with the quality and craftsmanship that can only be made in America.

Channel deflectors: These deflectors have a channel or groove that sits at the base of the door and redirects water away from the door. Gutter deflectors: These deflectors attach to the sides of the door and act like gutters, directing water away from the door and onto the ground.

Bolingbrook, Illinois Manufactured with Pride in the Midwest: Once WeatherTech's engineers have completed designing a new part, it is ready to be produced at our factories in Bolingbrook, Illinois. This is where almost all of WeatherTech's products are manufactured, in the heartland of America.

WeatherTech claims over 95% of its products are manufactured in the United States at its plants in Illinois.

Deflectors are used to increase consumption of ventilating air on the top floors. It is known that the deflector strengthens a suction from a ventilating duct at the expense of a wind pressure.

The answer to the question posed in the first sentence, is a resounding yes! Stone and bug deflectors work by altering the actual aerodynamics of your vehicle. The strip of acrylic that attaches to the front of your vehicle creates an upstream of air in front of your vehicle as you drive.

Wind deflectors are a useful but usually unnoticed or forgotten car accessory. Wind deflectors, when fitted, channel both air and airborne substances away from the window and down the side of the car. This slight alteration in aerodynamics lets you enjoy fresh air without buffering and bugs.