What is Mr. Gasket Headlock Locking Header Bolts?
Mr. Gasket Headlock Locking Header Bolts are a unique and highly innovative product designed for high-performance race cars and street machines. These bolts feature a patented locking system that ensures that they remain tightly fastened to the header, even in the most demanding of conditions.
The locking system consists of a set of uniquely designed washers that are placed between the bolt head and the header flange. These washers have a series of teeth that grip onto the header flange, preventing the bolt from loosening due to vibrations, thermal expansion, and contraction.
One of the main advantages of Mr. Gasket Headlock Locking Header Bolts is that they eliminate the need for traditional locking hardware, such as safety wire or lock washers. This not only saves time and money but also reduces the risk of potential failures due to improper installation or maintenance.
Mr. Gasket Headlock Locking Header Bolts are made from high-quality materials and are available in a variety of sizes and finishes to suit different applications. They are ideal for high-performance engines that generate a lot of heat and require a secure and reliable fastening system.
Whether you are a professional racer or an avid street enthusiast, Mr. Gasket Headlock Locking Header Bolts are an excellent choice for ensuring the longevity and reliability of your engine's exhaust system. With their unparalleled durability, ease of installation, and innovative design, these bolts are sure to enhance the performance and longevity of your vehicle.
Frequently Asked Questions about mr. gasket headlock locking header bolts
These ARP header bolts are made of Stainless Steel 300: STAINLESS STEEL: Ideally suited for many automotive and marine applications because stainless is tolerant of heat and virtually impervious to rust and corrosion.
Set or a wrench or a socket. And tighten them all to the perfect specification. And if you're not sure exactly what to torque them to check your repair.
Stage 8 Locking Header Bolt Kit for Mopar Small Block features a locking header bolt kit for Mopar small block 273 - 360 cu/inches and 5.2/5.9 liter. It includes (12) 5/16-18 X 7/8 inch bolts with double hex head (includes 3/16 inch recessed allen head) and 12 each locking retainers and clips.
Hex bolts, also known as hexagonal head bolts, are threaded machine bolts used with a nut or in a tapped hole. As the name suggests, hex head bolts are hexagonal heads (6 sides) made from grade 2 galvanized steel, 316/304 stainless steel, and grade 5 zinc plated steel.
Studs and bolts come either black oxide chrome moly or Stainless 300. Both are nominally rated at 170,000 psi tensile strength; substantially stronger than Grade 8 hardware.
A self-locking bolt is a bolt that has a locking mechanism designed to keep the bolt tight without needing a separate lock nut or lock washer. Its specialized design helps to prevent the possibility of unintentional loosening, even in high-vibration applications.
Header Bolts, 3/8-16 x 1 Inch, Set/12.
3/8-16 x 1 Inch
Header Bolts, 3/8-16 x 1 Inch, Set/12.
grade 8 bolt
A grade 8 bolt is the highest grade SAE bolt. Grade 8 bolts have a minimum tensile strength of 150,000 PSI. As a comparison, the ASTM A325 bolt is roughly equivalent to the SAE grade 5. A grade 8 bolt would be one that meets ASTM A490 standards.
Grade 10.9 bolts: As these bolts are most often used in the automotive industry, they are also referred to as 'car bolts'. They are made of boron or carbon steel and have high tensile strength (1040 MPa).
The bolt grade determines the maximum amount of stress the bolt can handle. Tensile strength is the amount of pull the bolt can withstand before breaking. The method used for tightening the bolt is dependent upon the bolt grade. The grades are indicated on top of the bolts. They show up as raised numbers or dashes.
Inch fasteners, which are more common in North America, will have a grade or a rating from the American Society for Testing and Materials. Property classes are used for metric fasteners. In the metric system, property classes are used to break down the strengths of different fasteners.
Locking nuts or lock nuts are special types of fastener designed to achieve a secure fixing. Some suppliers call them self-locking nuts or stiffnuts. They are screwed onto a bolt or threaded rod just like standard nuts, but a lock nut will then resist loosening under torque or vibration forces.
Locking devices are used for attaching belt pulleys, chain wheels and other components on the shaft. They are suitable for small shafts in which a key/slot connection is not possible.
The measurement of an inch nut or bolt will be listed as the thread size - a number between one and 12 or an inch increment followed by the threads per inch (TPI). If the diameter is less than 1/4 inch, the diameter will be listed as a number between zero and 12; the larger the number, the closer it is to 1/4 inch.
A header image follows a 4:1 aspect ratio, which means that it should be four times as wide as it is tall. For example, if the header image is 400 pixels wide, it should be 100 pixels tall. The best size for a header image is 1600x400 pixels.
