9 Gun Bore Cleaner: This traditional gun cleaning solvent cleans fouling and loosens dirt and debris from firearm parts. Its solvent base aids in cleaning and preventing carbon and lead build up.

He had already purchased a kit containing the Bore Cleaner and Lubricating Oil, and was concerned that since the bottle said "Bore Cleaner", it wasn't to be used on other parts of the gun. Actually, it is fine to use anywhere on your firearm where you need to remove powder residue, and to some extent, lead fouling.

Liquid Gun Solvents Both use plain old petroleum-based Kerosene as one of their primary solvents, and Ed's Red uses Acetone like most of the spray aerosols I checked. So whether you make or buy your own solvents, it's important to do a little research and know exactly what you're putting on or in your gun.

Gun cleaners are used to clean the gun and remove any build-up in the firearm. Gun oil lubricates the firearm and protects it from rusting. Using both gun cleaners and gun oil is essential to maintain your firearm. Gun oil is straightforward to use, and a little goes a long way.

Apply a small amount of Hoppe's bore cleaner to the head of the BoreSnake, just ahead of the bronze bristles. Apply a few drops of Hoppe's lubricating oil to the BoreSnake's tail. Drop the BoreSnake's brass weight through the opened action and down the bore pulling it through until it comes out of the muzzle.

To clear rust from a bore, use a bore solvent and scrub with a copper or brass brush, then have a gunsmith inspect for any pitting and that can become a failure point for your barrel. I wouldn't run rust remover through it, it will also remove any bluing it touches.

Bore Tech Eliminator is the best bore cleaner that quickly eliminates carbon and copper fouling without the hazards, toxicity, and odors found in competitive cleaners.

Gun Wash is a specially formulated lacquer thinner designed specifically for cleaning spray guns and lacquer painting equipment. It is not recommended for thinning lacquers (use Recochem Lacquer Thinner for this purpose). Recochem Gun Wash contains toluene and is less flammable than acetone.

A gun cleaning solvent is a liquid specifically designed to break down debris, residue, and carbon deposits. Each time you fire a gun, a little residue is left behind due to the combustion of the bullet's primer and gunpowder.

In general, a good gun cleaning supply kit should contain: Solvent, such as Hoppe's No. 9. Lubricant, such as ALG Defense or BreakFree CLP-2 Cleaner.

Up.

“You become a better shooter and a better hunter when you handle your equipment, which will help you yield the best results.” Clean your barrel when accuracy starts to degrade or once a year, and clean the other components after every trip to the range.

Vinegar. Vinegar is one of the best natural cleaners around. It will attack rust. To remove rust from small items like knives and hand tools, soak them in a bowl of vinegar.

With that in mind, here are our picks for the best rust remover you can get to fight rust particles on the things that matter most.

• Rust 911 Ultra Concentrate. Best rust remover overall.
• Evapo-Rust. Best rust remover for dirty parts.
• Metal Rescue. Best all-purpose rust remover.
• WD-40 Rust Remover Soak.
• POR-15 Rust Remover.

Bore Tech Eliminator is the best bore cleaner that quickly eliminates carbon and copper fouling without the hazards, toxicity, and odors found in competitive cleaners.

Best Overall: Hoppe's No. 9 has become almost synonymous with bore or gun cleaner. This potent gun cleaning solvent has no problem removing copper and lead fouling that accumulates in gun bores. During my years working at a gun shop, I cleaned countless guns that were long overdue.