Color and give it a good shake. You can only use a go glam polish for a go glam mini pedi. Pick your pattern pod. Check your pod to make sure the pattern tape is flat pop in your pattern. Pod.

Space. Always ensure the tape in your design pod is flat. If it's poking out a lot put the purple pin in the purple hole in the back. And turn counterclockwise push the blue button to eject cartridge.

And let go quickly. So cool if you press softly the nail won't get completely covered by the pattern. And if you hold it down too long it will be sticky and harder to release.

nail polish ingredients: water/aqua/eau, polyurethane-35, alcohol , polyvinyl alcohol, propylene glycol, phenoxyethanol, caprylyl glycol, may contain: titanium dioxide (ci 77891), red 7 lake (ci 15850), red 40 lake (ci 16035), blue 1 lake (ci 42090), yellow 5 lake (ci 19140, red 4 (ci 14700), balck 2 (ci 77266).

five minutes Salon quality nails are as easy as pop, paint and press! First, choose a pattern and pop it into the machine. Next, paint each nail with one of the non-toxic GO GLAM nail polish base coats (two colors included) and wait five minutes for nails to dry.

Tips and Tricks. Firstly, the transfers will only work with the included nail polish. This is because it's designed to be tacky, so the transfers stick to it.

We're going to find out what makes the so cool work EDG. This is the so cool sewing. Machine that it really is cool it sews without any thread. Now in here there are six needles.

File away any sharp edges. Just like you did with your nails measure your fingers against the adhesive stickers on the sheet. Once it's lined up properly peel off the white backing.

Here are eight common ingredients in nail polish and what to look for.

• Resin. The tough material that holds polish together, resin is a type of polymer, meaning it is made of large molecules that string smaller molecules together.
• Solvent.
• Dispersants.
• UV Stabilizers.
• Plasticizers.
• Dyes and Pigments.
• Micas.

Nitrocellulose Nitrocellulose is a film-forming polymer that is the main ingredient in most nail polishes.

UV lamps typically take between 2-3 minutes to cure the polish, while LED lamps can cure the polish in as little as 30-60 seconds. This is because the light from these lamps reacts with the chemicals in the polish to harden it, making it dry faster.

Glametic Press-On nails come with 24-30+ nail sizes, a cuticle stick, a nail file, an alcohol pad, and nail glue. The company says the nails can last up to two weeks, depending on your lifestyle. They range in price from $15 to $22, depending on the style but they are reusable and a fraction of the price.

Click our tip right over here. Now I'm going to do the same with a regular. Polish. As you can see your regular polish is not covering the same way as a stamping polish.

Similar to a gel top coat, you should not use a UV gel base coat with regular nail lacquer. Your regular nail polishes will not adhere very well to a gel base coat.

So let's take a look here. I've got my fiber in. Place. I'm just going around my coffee design and you can see how that really takes all of that fluffy fiber. And works it down in.

Projects. You will need four double-a batteries which are not included. This is pretty easy to do though there will be a learning curve for beginners. I made the sunglasses.