I cut mine down a tad larger than the hole. And place it right on there. Then i used the primer enhanced speckle to cover it on up you'll want to feather it out on the edges. So you hide the patch.

30 minute From the Manufacturer 3M Patch plus primer is ideal for repairing small holes, cracks, and damaged surfaces such as drywall, plaster, stucco, and wood. 30 minute dry time is based on 1/2 inch diameter hole by 1/8 inch deep.

Acrylic Spackling Compound These spackles are very versatile as not only can they cover large and deep holes, but they can also be used on a variety of surfaces and materials.

Yeah good you see you learnin already and just stuck that up there nice and tight now Edie. You don't have to trim the patch. No because remember we're gonna go over that with a spackle.

Review on today's product we're going to review this high strength small hole repair from 3m. It's an all-in-one. Applicator it comes with a putty knife a sanding pad. And primer enhanced spackle.

How to fill deep holes in walls

1. Clean the hole making sure you remove all loose materials.
2. Use a flat-edged filling tool to push the filler into the crack.
3. Smooth it with a wet knife.
4. Check the instructions to see how long it takes to dry – this should typically be around one or two hours.

5 minutes Allow the primer to dry completely, which is usually accomplished in 5 minutes at room temperature, before applying tape. Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion.

The drying time is approximately 15 seconds to 1 minute and the bonding range is 15 seconds to 15 minutes. To get the maximum storage life, which is about 15 months, the spray will need to be stored in temperatures ranging from 60° to 80°F. 3M Super 77 Spray Adhesive is flammable, so please use the product responsibly.

Fillers and putty are DIY products which are used to remove unevenness from surfaces. The fillers are generally used to fill gaps and holes in walls and wood (often decayed wood). Putty is used to smooth relatively small uneven surfaces caused by screw holes, scratches or coarse materials.

How to fill a hole in your wall

• Powder filler is often for deeper cracks or holes.
• Ready-mixed fillers can be used on a variety of different jobs and are often really easy to apply.
• Flexible fillers allow for any movement in materials, so they're great for brick, stone and wood.

Line lightly. Apply the supplied tape over the hole trim the tape if necessary. You'll be using a wall repair compound that includes fibers for additional strength when it drives.

So there you have it sprinkle on patch magic. Keep it watered in and you'll have a patch free lawn before you know it. For lawn care hints and tips and answers to all your gardening questions.

Specific benefits of 3M™ VHB™ Tapes include:

• Fatigue resistance.
• Gap filling between substrates.
• Accommodation of different thermal expansion rates.
• Vibration damping.

3M™ Headliner Adhesive bonds automotive headliners, carpet and other fabrics with exceptional strength. Our adhesive formula effectively bonds fabrics to non-porous materials such as metal and plastic. The attachment resists the deteriorating effects of moisture, humidity, heat, cold and other environmental conditions.

Powder filler is often for deeper cracks or holes. It's usually cheaper than other fillers, and you mix it yourself. Because of the depths it can fill, it's versatile and can often be used indoors or outdoors. Ready-mixed fillers can be used on a variety of different jobs and are often really easy to apply.

To fix it in place I'm gonna use some jib fix one adhesive well I've got to do is apply a couple of Dobbs here to the stud. And over here to the back block. Set it into place and wait for it to dry.