Lime-A-Way cleaner destroys with lime, calcium and rust stains caused by the natural minerals in your water. It effectively cleans the toughest hard water build-up. Your toughest limescale will be removed in seconds without scrubbing! Good for use on: Sinks & Fixtures, Tub & Tile, and Shower & Glass.

Ingredient Information

• Water.
• Hydrochloric Acid.
• PEG-2 Hydrogenated Tallow Amine.
• C10-16 Pareth (C12-16 Alcohols Ethoxylated or C10-16 Alketh)
• Methyl Salicylate.
• Acid Yellow 23.
• Acid Blue 93.

Reckitt Benckiser Product information

Ingredients from the label

• Water.
• Lactic Acid. LACTIC ACID. LACTIC ACID, L-
• Gluconic Acid. GLUCONIC ACID.
• Lauramine Oxide. LAURAMINE OXIDE.
• Tripropylene Glycol n-Butyl Ether. TRIPROPYLENE GLYCOL BUTYL ETHER.
• Blue 1. CI 42090 (FD&C Blue No. 1 or D&C Blue No.
• Yellow 5. FD&C Yellow No. 5 (CI 19140)

How long should I leave LIME-A-WAY® on stains? For a heavily soiled surface, allow about 1-2 minute contact time; then follow label instructions for wiping & rinsing. The steps may need to be repeated depending on the soil intensity.

How long will it take for lime to react with the soil and how long will it last? Lime will react completely with the soil in two to three years after it has been applied; although, benefits from lime may occur within the first few months after application.

Known Ingredients

• Ingredient.
• HYDROCHLORIC ACID.
• PEG-2 HYDROGENATED TALLOW AMINE.
• ACID YELLOW 23 (UNCERTIFIED FD&C YELLOW NO.
• PEG-8 TALLOW AMINE.
• ALCOHOL ETHOXYLATES (C12-15)
• METHYL SALICYLATE.
• BENZENESULFONIC ACID, ((4-(BIS(4-((SULFOPHENYL)AMINO)PHENYL)METHYLENE)-2,5-CYCLOHEXADIEN-1-

Dissolves stubborn rust, calcium and lime stains - even below the waterline. Leaves your toilet bowl completely clean, shiny and fresh smelling. Safe for plumbing and septic systems. Contains no phosphorus.

Dissolves stubborn rust, calcium and lime stains - even below the waterline. Leaves your toilet bowl completely clean, shiny and fresh smelling. Safe for plumbing and septic systems. Contains no phosphorus.

LIME-A-WAY® can be used to clean many surfaces that come into contact with hard water, such as the bathtub, bathroom tiles, shower doors, sinks, and toilet bowl. In general, the product should be used on hard, non-porous surfaces.

CLR may etch older sinks, tubs, and tiles. Avoid contact with wood, clothing, wallpaper, carpeting, natural stones, brass, copper, aluminum, galvanized metals, any painted, coated or sealed surfaces. Clean spills immediately.

However, this doesn't mean that combining the two will create a super-cleaner - in fact, it actually puts your health at serious risk. Mixing vinegar and bleach together releases a poisonous chlorine gas, which can be fatal if inhaled at high enough concentrations.

: Causes serious eye damage. : May give off gas, vapor or dust that is very irritating or corrosive to the respiratory system. Exposure to decomposition products may cause a health hazard.

In general, the product should be used on hard, non-porous surfaces. LIME-A-WAY® is not recommended for use on natural marble, stone, terrazzo, polished or anodized aluminum, metallic or painted surfaces, colored grout or counter tops.

In addition, applications of lime should be made either in the spring or fall when rainfall is most abundant. Rain helps move the material into the soil profile and rootzone and also helps avoid any potential for turfgrass foliar burn or injury after application.

Never add more than 50 pounds of lime per 1,000 square feet in a single application. After you've applied the lime, immediately water your lawn to rinse any extra lime off the grass blades to prevent leaf burn.