Ingredient Information

• Water.
• Hydrochloric Acid.
• PEG-2 Hydrogenated Tallow Amine.
• C10-16 Pareth (C12-16 Alcohols Ethoxylated or C10-16 Alketh)
• Methyl Salicylate.
• Acid Yellow 23.
• Acid Blue 93.

Reckitt Benckiser Product information

And clr bath and kitchen cleaner for tougher stains. Build up and rust a half water and half clr mixture on a sponge. Wipes right through them rinse clean with cold.

Was useful to remove deposits of calcium at water level. I've got issues with calcium content in my well water that leave deposits on some fixtures after evaporation. I have used several brands of calcium / rust removal cleaners, and my experience has shown Lime-A-Way to be the most effective cleaning solution.

Lime-A-Way cleaner destroys with lime, calcium and rust stains caused by the natural minerals in your water. It effectively cleans the toughest hard water build-up. Your toughest limescale will be removed in seconds without scrubbing! Good for use on: Sinks & Fixtures, Tub & Tile, and Shower & Glass.

Known Ingredients

• Ingredient.
• HYDROCHLORIC ACID.
• PEG-2 HYDROGENATED TALLOW AMINE.
• ACID YELLOW 23 (UNCERTIFIED FD&C YELLOW NO.
• PEG-8 TALLOW AMINE.
• ALCOHOL ETHOXYLATES (C12-15)
• METHYL SALICYLATE.
• BENZENESULFONIC ACID, ((4-(BIS(4-((SULFOPHENYL)AMINO)PHENYL)METHYLENE)-2,5-CYCLOHEXADIEN-1-

Hydrogen peroxide: Using hydrogen peroxide removes not only hard water stains, but also soap scum. "Apply the solution to the area you are cleaning and let it sit for 15 minutes. Once that is complete, carefully scrub with a brush you have on hand," says Dills.

The scientific answer is that limescale is a build-up of a hard deposit with a chalk-like appearance which mainly consists of calcium carbonate. It is usually left behind by hard water when it evaporates - water that has a high mineral count.

Apply directly to the stain or damp sponge or cloth. Wipe and rinse area promptly and thoroughly with cold clean water. For heavy build up or hard water deposits, apply directly to the area then rinse promptly. Always re-close after use and store with cap closed.

Lime-A-Way cleaner destroys with lime, calcium and rust stains caused by the natural minerals in your water. It effectively cleans the toughest hard water build-up. Your toughest limescale will be removed in seconds without scrubbing! Good for use on: Sinks & Fixtures, Tub & Tile, and Shower & Glass.

Known Ingredients

• Ingredient.
• HYDROCHLORIC ACID.
• PEG-2 HYDROGENATED TALLOW AMINE.
• ACID YELLOW 23 (UNCERTIFIED FD&C YELLOW NO.
• PEG-8 TALLOW AMINE.
• ALCOHOL ETHOXYLATES (C12-15)
• METHYL SALICYLATE.
• BENZENESULFONIC ACID, ((4-(BIS(4-((SULFOPHENYL)AMINO)PHENYL)METHYLENE)-2,5-CYCLOHEXADIEN-1-

Limes are high in vitamin C and antioxidants - both of which may offer health benefits. Eating limes or drinking the juice may improve immunity, reduce heart disease risk factors, prevent kidney stones, aid iron absorption, and promote healthy skin. Avoid limes if you're allergic to citrus fruit.

Lime is also used as a neutralizing agent in the manufacture of chrome chemicals (bichromate); for purification of salt brines; to aid in the concentration of glucose and dextrin; to make metallic calcium; as soda-lime, an absorbent and gas purifier; and for countless other minor or isolated purposes, such as for CO2 ...

Lime is an inorganic material composed primarily of calcium oxides and hydroxides, usually calcium oxide and/or calcium hydroxide.

Sprinkle salt on the bathroom tiles and leave it for about 30 minutes. Scrub off the salt using a sponge or brush. Make a paste using water and baking soda. Apply the paste to the stained area using an old toothbrush and allow it to sit for 11-12 hours and then scrub and rinse off the residue.

Wipe off using salt Leave some salt on the wet surface for at least half an hour. Afterwards, wash it down with water and dry the surface. To make sure that the stubborn stain is gone for good, use a brush to scrub off areas with the salt solution. Hard water stains work well with salt scrubbing.