The Rockwell Versacut is a powerful, multi-functional, ultra-compact circular saw which can cut different materials such as wood, flooring, plastic, ceramic tiles, slate, aluminum and even sheet metal. The Versacut features a lightweight, compact and balanced design that is perfect for everyday cuts.

Rockwell's RK3440K VersaCut is a powerful, multi-functional, ultra-compact circular saw that can cut wood, flooring, plastic, ceramic tile, slate, aluminum and even sheet metal.

Degrees. It's the same as if it was a full size circular. Saw also you can set the depth of the cut.

Rockwell Tools is a line of power tools that is currently owned and distributed by Positec Tool Corporation, a China-based company with North American headquarters in Charlotte, North Carolina.

What you want to do is you want to replace the table plate lower the arm. And get cutting. Now if you want to replace that blade. Again then use your holder push.

Cold saws make clean, “burr-free” cuts like no other machine. The most important difference between cold saws and band saws is the amount of burr on the cuts that they produce. A band saw gives good quality cuts, but can't match the smoothness of results from a cold saw.

Cold saws run at a very low RPM (around 22 to 88 RPMS) but will cut your material faster than a chop saw that runs at around 4000 RPMS. The wide range of RPMs and bade tooth options that a cold saw offers also makes it capable of cutting most ferrous and non-ferrous material.

Cutting depth up to 1-11/16"(42.8mm) at 90°,1-1/8"(28mm) at 45°. 4 Blades: Easily cuts through woods, tile, soft metal and plastic. Portable & Convenient: The single Compact saw weights about 6.0lbs. It contains laser guide, scale ruler and dust port to create a precise cutting area.

Yes, the WX437L Corded Compact Circular Saw is the perfect tool for cutting through 2x4 lumber and plywood at 90°. Does this compact circular saw have a laser guide?

Positec Rockwell is manufactured by Positec, one of the international leaders in power tool manufacture. Positec also manufacture Worx, Icon, and Xceed power tool brands.

Rockwell Tools is a line of power tools that is currently owned and distributed by Positec Tool Corporation, a China-based company with North American headquarters in Charlotte, North Carolina.

A table saw that you can take with you to the job or easily move around the workshop. Convenient carry handle makes it easy. Rip, cross, scroll, and miter cuts are all possible thanks to the standard guard and riving knife system. Wood, ceramic, plastic, aluminum, and metal.

Up at the front of the saw. There are arrows on the blade. And on the blade guard to help with this face the arrows in the same direction now reinstall the bolt and washer and snug it.

Another downside to cold saws is that the hardness makes the saw blades brittle and subject to shock. Any amount of vibration - for example, from insufficient clamping of the part or the wrong feed rate - can easily damage the saw teeth.

Cold saws don't require flood coolant because the heat generated by the cutting action is transferred to the chips. The chips are ejected by centrifugal forces of the rotating blade. This process allows both the blade and the cut material to remain cool, hence the name “cold saws” - but beware of the chips.

Cold saws, with their toothed blades, chip material as the blade spins. Unlike blades for abrasive chop saws, the toothed blades for cold saws (and dry saws) are pricey, and can run you over $200.00 per blade depending on the blade's material and size.