Cabot semi solid deck stain It lasts for 6-7 years before I have to do it again. I haven't had to do the pickets in at least 10 years.

Two-coat application recommended. Stir thoroughly before use. Apply with a high-quality stain brush.

Skip a Second Coat With a solid stain, CR typically recommends putting on two coats because these are more like a regular paint and will dry one on top of the other. But with a clear or semi-transparent wood stain, a second coat will just sit on the surface of the first coat.

Cabot® Semi-Solid Stain + Sealer hides some wood grain to form a stronger weather barrier. Available in 100 colors, both classic or modern and on-trend, this stain is made to last. Choose a one-coat finish that won't show brush marks and resists lapping, peeling, scuffs and scratches.

shellac, polyurethane and epoxy coatings, are the principal coatings involved when peeling problems occur. To a lesser extent, other products like semi-transparent stains, Cabot Semi-Solid® Stains and Cabot Decking Stains can flake and peel from wood siding or deck structures if these products are over-applied.

Stains and oils penetrate wood best when it's cool and dry. If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat.

After you're finished applying, leave your deck to dry for 2 hours before applying a second coat. Wait another 2 hours and it's ready to walk on. Too easy!

Hours before moving furniture back onto the surface. Now for a safe responsible cleanup clean your brushes appropriately.

2 to 4 years Clear and transparent stains need a touchup every year or two. Semi-transparent last 2 to 3 years. Semi-solid stains are good for 2 to 4 years of protection. Solid stains on decks may protect up to 5 to 7 years.

Semi-solid stains are much like semi-transparent stains, except that they have a deeper color and show less of the natural wood grain. They provide longer protection and can also be tinted in nearly any color. Solid stains are nearly indistinguishable from paint.

2 to 4 years Clear and transparent stains need a touchup every year or two. Semi-transparent last 2 to 3 years. Semi-solid stains are good for 2 to 4 years of protection. Solid stains on decks may protect up to 5 to 7 years.

Too Much Stain and Trapped Moisture Wood can only absorb so much stain. If too much stain is applied, the excess material will linger slightly above the surface and prevent moisture from rain and dew from leaving the wood. If this moisture can't evaporate, it will remain on the surface and begin peeling away the stain.

The moisture trapped inside the wood may hamper stain absorption into its fibers, eventually causing it to peel off. Over application: People often wrongly assume that applying one or two more coats will make the stain more durable.

Stains need between 12-48 hours to fully dry. If water comes into contact with your newly stained deck before it's dry, the water will soak into the pores of the decking material and displace the stain.

72 hours It's safe for a water-based deck stain to be exposed to rain as long as it has fully dried, which can take one to 24 hours. However, it must cure for up to 72 hours before you can walk on it or place any furniture on it.

Types of Wood Stains Solid wood stains: Just like regular paint, solid stains hide the grain of the wood, and the best should last three to five years on a deck, the longest of the three types of stains.