Cabot semi solid deck stain It lasts for 6-7 years before I have to do it again. I haven't had to do the pickets in at least 10 years.

Easy to apply, Cabot Wood Toned Stain slightly darkens wood when first applied, leaving a flat, translucent-toned finish, which weathers with time to a natural wood hue. For use on new or reconditioned exterior wood only, including decks, siding, fences and trim.

Two- Two-coat application recommended. Stir thoroughly before use. Apply with a high-quality stain brush.

The water repelling oil-based finish resists scuffs and scratches. As well as lapping peeling and fading plus it provides a mold and mildew resistant finish.

Because you want to wait for days that aren't excessively hot or humid, the best times to apply deck stains are in the late spring and early fall, when the weather is moderately warm and dry. Check the weather and find a time when it's not expected to rain for two days before and following the deck treatment.

The moisture trapped inside the wood may hamper stain absorption into its fibers, eventually causing it to peel off. Over application: People often wrongly assume that applying one or two more coats will make the stain more durable.

Lacquer stains are difficult to use because of their very fast drying. Professionals usually work in pairs, with one person spraying the stain and the other following right behind wiping off the excess.

Best Overall Deck Stain: Cabot's Australian Timber Oil For that, you'll want Cabot's Australian Timber Oil. It's arguably the best deck stain for pressure-treated wood, as this darker Amberwood pigmentation provides both beauty and lasting power.

Stains and oils penetrate wood best when it's cool and dry. If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat.

After you're finished applying, leave your deck to dry for 2 hours before applying a second coat. Wait another 2 hours and it's ready to walk on. Too easy!

Stain shouldn't be confused with deck sealer, though. Terminology differs slightly among manufacturers, but sealers generally impart little or no color to wood. They simply seal it against air and moisture. Stains, which perform better than sealers, use pigments that add color to wood.

The sealant will (very, very slightly) darken the wood, but if you whitewash your piece it will help maintain the natural and original color. 4. Use a sponge brush to eliminate brush strokes, and apply the General Finishes Flat Out Flat topcoat.

First when applying stain to the full length of the floorboards. Make sure not to break in the middle of the board. We are using an exterior stain pad for the railings. And vertical posts.

If it has rained recently, wait at least 1 to 2 days for the wood to dry before attempting to apply stain. Depending on how much rain you got, a humid climate or colder temperatures may take closer to 2 days, while dry and hot areas should only take 1.

Types of Wood Stains Solid wood stains: Just like regular paint, solid stains hide the grain of the wood, and the best should last three to five years on a deck, the longest of the three types of stains.

Also, Ready Seal oil based deck stains don't peel… With an oil based deck stain like Ready Seal, you should only notice it fading, never peeling… So the maintenance is easier than with a water based stain…