StructureScan® 3D imaging scans underwater terrain and fish-holding structure to create a high resolution, three dimensional view beneath the surface. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective.

Lowrance Structure Scan 3D

StructureScan® 3D imaging scans underwater terrain and fish-holding structure to create a high resolution, three dimensional view beneath the surface. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective.

StructureScan 3D is powered by a multi-beam sonar technology that not only produces picture-like, three-dimensional views of underwater structure and bottom contours, but also boosts the performance of two-dimensional Downscan and StructureScan HD imaging, providing views up to 600 feet to each side of your boat.

The difference between 3D scanning and 3D modeling is that they are used for different things. For example, 3D scanning would be more useful if you need to collect data about complex objects. If the object that you would like to study does not yet exist, then 3D modeling would be the right choice.

3D scanning technology can be applied at any point in a typical manufacturing cycle, saving time, money and material. 3D scanning results in higher quality, better fitting parts that are less costly to manufacture. The cost of a typical manufacturing design cycle is reduced by 75% by utilizing 3D scanning.

Thirdly the best bet when mounting your transducer to read at speed is to have the bottom of it 3-4 mm below the waterline. Because the transducer can only ping in water so you do want it submerged. If it's too deep sometimes the front face of it will create turbulence and bubbles = bad.

So there's a fish there there's one there. Move out so you see we've got a lot of small fish in this area. But that's basically what they look like on.

$1,380.00. StructureScan 3D offers anglers a new dimension in Sonar technology, allowing you to see Fish, structure and bottom contour in a stunning, true-to-life three-dimensional view on Lowrance HDS Gen3 units.

StructureScan overlay displays in real-time when activated, but you can also save overlays for future use. A powerful use of this feature is waypoint marking key cover like trees or boulders and then being able to make precise casts to the cover, as it's displayed right there on top of the contours.

Options select presentation and then touch the no contours if it's got the little orange square in the corner. Once you do that all of your contour lines are going to show back up.

The scan provides a completely different view of your baby than the usual 2D ultrasounds. You will enjoy some extra bonding time with your baby. 3D ultrasound scans are very safe so there are no risks.