What the Kreg Accu-Cut TV commercial - Perfect Cuts Effortlessly is about.
The Kreg Accu-Cut TV spot centers on the device's ability to make perfect cuts effortlessly. The advertisement opens with a man preparing to make a cut on a piece of wood with a traditional handsaw. He struggles to keep the saw steady and even, resulting in a jagged and uneven cut.
Enter the Kreg Accu-Cut. The device attaches to a circular saw, allowing for smooth and precise cuts every time. We see the same man make a cut with the Accu-Cut and the result is an even and clean cut that he effortlessly completes.
The TV spot highlights the versatility of the device, showing it used to cut everything from plywood to solid wood. The Accu-Cut makes it easy for DIY enthusiasts to achieve professional-level cuts in their home workshops.
The advertisement ends with a message that sums up the Accu-Cut's appeal: "For perfect cuts effortlessly, choose Kreg Accu-Cut." The TV spot is effective in showcasing the device's ease of use and ability to produce quality results.
Kreg Accu-Cut TV commercial - Perfect Cuts Effortlessly produced for
Kreg
was first shown on television on May 20, 2018.
Frequently Asked Questions about kreg accu-cut tv spot, 'perfect cuts effortlessly'
You don't even need to clamp the track down thanks to anti slip strips that hold the track in place exactly. Where you place it. That track guides the Accu cuts Universal sled it accepts.
Against your sheet. Turn this on and go a large handle on the edge guide that helps you maintain solid. Contact with the edge of your sheet.
4 days ago
Kreg® Accu-Cut 48'' Track Guide for Circular Saws
Rip or crosscut panels up to 48'' long - Universal Saw Sled accepts almost any circular saw, left- or right-blade. Make straight, accurate, splinter-free cuts!
The RIP cut uses an edge guide that follows the edge of the sheet as you push the saw along the saw rides on an aluminum arm that's attached to the edge guide. So with the RIP cut you can easily cut a
The Rip-Cut Panel Jig is the perfect tool for making long, continuous cuts down the length of sheet materials, while the Accu-Cut Circular Saw Guide is designed to cut across sheet goods - squarely or at an angle.
- 1 Evolution Multi-Material Circular Track Saw.
- 2 Kreg ACS2000 Adaptive Cutting System Saw.
- 3 Festool 575389 Plunge Cut Track Saw.
- 4 DEWALT FLEXVOLT Cordless TrackSaw Kit.
- 5 WEN Sidewinder Circular Track Saw.
So once you've cut your wood with your saw your next step is to use your correcting. And before we had our Craig jigs we would have to pre drill and countersink.
Then we'll tighten the screw with the hex. Wrench. Next we'll set the thickness stops. Just press the gray tabs and push the stops to match the thickness of our material. Now we can add the clamp pad.
A plunge saw is like a circular saw with a blade that spins and cuts, only with much more sophistication and accuracy. Rather than the guard retracting to expose the blade when cutting, such as with a circular saw, it has a fixed guard and the blade is exposed when plunging the handle to the pre-set depth.
Manual circular saws, miter saws, hand saws, and reciprocating saws all have their place and can produce an amazingly wide variety of cuts. But when it comes to making a length-wise rip cut in wood, a table saw is the best tool to do it accurately while producing cuts that look like factory edges.
When cutting sheet goods like plywood or MDF, wood grain isn't an issue, but the terms remain the same. Crosscutting refers to cutting across the short dimension and ripping means cutting along the long dimension.
Crosscutting is cutting across the grain of dimensional wood like framing lumber, molding or fence posts. Ripping is cutting in the same direction as the grain in dimensional wood and is best done with a dedicated ripping blade.