Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency.

Lucas Fuel Treatment cleans and lubricates valves, pumps, carburetors, injectors and compression rings. It is an absolute must for rotary pumps! Lucas Fuel Treatment safely replaces the need for lead in older engines.

And what this does is by adding alcohol the alcohol will mix with the water. And then basically solubilize. That into the gasoline. So it's burned with everything else and passes out the exhaust.

Although most fuel injector cleaners begin working immediately, it takes time before the improvements become noticeable. Before the cleaners start working effectively, the vehicle should travel several hundred miles and burn a good portion of a full fuel tank.

Directions For Use Deep clean as needed, at least every 3 to 4 thousand miles. 16oz Bottle - For a Deep Clean, pour entire bottle into fuel tank and fill with any grade gasoline, up to 30 gallons. Deep clean as needed, at least every 3 to 4 thousand miles.

However, adding too much injector cleaner can cause damage to the gas tank linings due to the strong chemicals and additives. Therefore, it is important to follow the manufacturer's instructions and not to add too much injector cleaner.

For the first dose, simply install when you have a full tank of gas. It's that simple. From there, many experts will probably tell you that you should add a fuel injector cleaner to your gasoline every time you fill your tank up.

The solvents work by dissolving the buildup inside the injectors and other parts of the fuel line. Because the solvents are combustible, they burn off with the fuel as your engine runs and are not harmful to your vehicle.

A commonly asked we get is "When should I pour in. Lucas Fuel Treatment when I am at the Gas Station?" You can pour the product in before or after filling tank, as you will see, it mixes immediately with gasoline .

Absolutely Yes. Fuel injector cleaners work in very diluted amounts, and twice the strength (same amount of cleaner in half as much gasoline) works just a little faster. After all, we're talking about 12 ounces of cleaner in 12–15 gallons of gas, so the ratio of cleaner to gas is 100:1.

Overdosing can lead to a whole new list of fuel and engine issues from clogged filters to overall decreased engine performance and efficiency. If you're losing lubricity, don't over-treat.

These can start to work in as little as 5–10 miles once the treated fuel makes it to the engine. The cleaning will happen gradually as the fuel is used and it is recommended to run the treated tank as empty as possible before re...

Directions For Use The recommended dosage is 2-3 ounces of Fuel Treatment for every 10 gallons of gasoline or diesel fuel. Pour Lucas Fuel Treatment directly into fuel tank. Exceeding the recommended dosage is not harmful to your vehicle. 5.25oz Bottle - One bottle treats up to 25 gallons of fuel.

every 1,500 to 3,000 miles Generally, you can use fuel injector cleaner every 1,500 to 3,000 miles. Many people like to use fuel injector cleaners whenever they get an oil change, as it's easy to remember. Another way to know when to clean your fuel injectors is to look out for signs of a clogged fuel injector.

For the first dose, simply install when you have a full tank of gas. It's that simple. From there, many experts will probably tell you that you should add a fuel injector cleaner to your gasoline every time you fill your tank up.

How often should I use a fuel additive in my gas tank? For fuel injector cleaners, manufacturers recommend once every 3,000 miles. However, some brands may go up to 10,000 miles between fuel additives because you have a newer car or use high-quality gasoline.