Nu Finish® Scratch Doctor® has been proven by independent laboratory tests to remove surface scratches better than any other scratch remover on the market. Also, most scratch removers will actually leave more scratches behind than they remove.

Comparison of best car scratch removers

Most light scratches can be fixed by polishing the clear coat with a rubbing compound. It will remove the damaged layer and leave your paint looking good as new. If the scratch is deep, you may need to sand the area before polishing it. It will remove any rough edges and make it easier to apply the compound evenly.

How do they work? The pen is filled not with coloured paint, but with a clear coat resin, basically the same material as the topcoat of the vehicle's paint job. By pressing the applicator of the pen along the scratch, the resin fills in the gap and effectively removes the scratch.

DEEP SCRATCH Allow to dry for 20-30 minutes, then sand the filler to make it smooth. Return to step 2 on the front page of this leaflet to continue the repair.

Scratch Doctor's Glass Repair Polishing Compound is an easy, professional way to repair light scratches and surface marks on car windscreens and side windows. Plus, you can also use it for domestic glass. Made from cerium oxide, this ready-mixed formula is great for repairing minor marks and scratches.

Once the wound is clean, there are several techniques to speed up the healing process. These include the use of antibacterial ointments, turmeric, aloe vera, garlic, and coconut oil. A person should seek medical help right away if their wound is large.

And add a layer of clear coat. And finally the fourth. Step is the blending. Step this is where we're gonna use some sandpaper. And polish to blend our new touch-up paint into the original.

Simply wash and dry the car, apply liquid scratch remover (typically around $10) or another rubbing compound to a clean microfiber towel and rub against the affected section in a back-and-forth motion for about 60 seconds. Let dry and buff off excess with another towel.

Here's how to go about the process.

1. Apply A Glazing Putty. You can pick up glazing putty at most auto repair shops or supply stores.
2. Remove Excess Putty. To achieve a smooth surface, you must remove any excess putty that remains.
3. Paint Over Scratches.
4. Use a Fine Brush to Touch Up Paint.

To fix a deep scratch on a car follow these three steps:

1. Clean and fill the scratch.
2. Apply a new layer of enamel paint and clear coat.
3. Buff.
4. Polish.

Here are the steps we recommend you take:

1. Step 1: Clean the Area. Use car wash soap and water to clean the area around the scratch.
2. Step 2: Apply Touch-Up Paint.
3. Step 3: Sand the Area.
4. Step 4: Apply Rubbing Compound.
5. Step 5: Apply Car Polish.

Buffing an area with polishing or rubbing compounds removes scratches and blemishes, but they also remove wax. Clean the treated area and reapply wax using Turtle Wax Super Hard Shell Paste Wax, Turtle Wax ICE Spray Wax or Turtle Wax ICE Seal N Shine. Your preferred wax method will restore shine and protect the paint.

Depending on the car scratch remover that you used, you can wax the area right away or you might need to wait up to one week before waxing it. Waxing the area will seal the paint you have repaired.

Top Rated Car Scratch Removers

• Best Overall: Meguiar's Mirror Glaze Ultra-Cut Compound.
• Best Kit: Carfidant Ultimate Scratch & Swirl Remover.
• Also Consider: Shine Armor Revive Scratch Repair Swirl Remover.
• Best Value: 3M Scratch Removal System.
• Best for Deep Scratches: Chemical Guys VSS Scratch & Swirl Remover.

Remove any dirt or debris with a tweezers cleaned with alcohol. See a doctor if you can't remove all debris. Apply an antibiotic or petroleum jelly. Apply a thin layer of an antibiotic ointment or petroleum jelly to keep the surface moist and help prevent scarring.