What is 3M Automotive Headlight Restoration Kit?
The 3M Automotive Headlight Restoration Kit is a professional-grade product designed to remove the cloudiness and yellowed haze that builds up on plastic headlight lenses over time. The kit is easy to use and comes with everything needed to restore headlights to their original clarity and shine.
The kit includes abrasive technology that effectively removes built-up haze and debris from headlights, taillights, fog lights, directional lights, and more. It also includes a UV-resistant clear coat that helps to protect and restore the lens to its original condition.
Using the 3M Automotive Headlight Restoration Kit is a simple process that can be completed in just a few steps. First, the headlights are cleaned using the provided cleaning solution. Then, the abrasive pads are used to remove the built-up haze and debris, and the lenses are buffed to a shine. Finally, the clear coat is applied to protect and restore the lens to its original condition.
One of the advantages of the 3M Automotive Headlight Restoration Kit is that it is designed to be used by anyone, regardless of their level of experience. It does not require any specialized tools or equipment, and the process can be completed in a relatively short amount of time.
Overall, the 3M Automotive Headlight Restoration Kit is an excellent choice for anyone looking to restore their headlights to their original clarity and shine. It is easy to use, effective, and provides long-lasting protection against further damage and decay.
Frequently Asked Questions about 3m automotive headlight restoration kit
Essentially they help you sand off the damaged lens coating, then reapply a protective layer. The kits require a bit of elbow grease. Some require an electric drill. “The restoration kits absolutely work, and they're very much a DIY project that you can do in your garage or driveway,” says Stockburger.
To get started all you need is the 3m kit a spray bottle with water a few paper towels. And some automotive masking tape to protect your car's painted surfaces. Once you've taped off the perimeter
3M states that it's good to do this every few months, making me think that this treatment may last 6 months at best before headlights turn yellow again. For an average user, however, expect having to re-do this treatment 2-3 times a year.
Our Top Picks
- Cerakote Ceramic Headlight Restoration Kit. $17 at Amazon. $17 at Amazon.
- Meguiar's Two Step Headlight Restoration Kit. $21 at Amazon. $21 at Amazon.
- Mothers NuLens Headlight Renewal Kit. $22 at Amazon.
- Sylvania Headlight Restoration Kit. $20 at Amazon.
- Chemical Guys Headlight Restore and Protect. $20 at Amazon.
A professional headlight restoration will usually be able to restore the headlights to nearly 80–90% of their original condition. This can significantly improve visibility and safety while driving.
Can a headlight lens be refinished more than once? Yes, a lens can be refinished several times using the 3M Refinishing System. Most lenses are made of polycarbonate material that is 1/8” to a ¼” thick. We are only removing a small fraction, less than 1/32” in most cases, from the overall lens thickness.
What is the service life of a restored headlight? Depending on driving conditions, environmental factors, and the customer's care of their vehicle, the expected service life of a headlight restoration is at least one year and may be as long as 3 years.
Most require several steps, but the results can be well worth the effort. Our testing has found that they can make a big difference - particularly if you don't rush the job. And they can restore old headlamps for far less money than it would take to replace them.
#1 Overall Best Kit: Sylvania Headlight Restoration Kit
When using the Sylvania product, the first step is to spray on the surface activator to soften the plastic. Then, you sand off the initial clear coat and apply a polishing compound. The last step is to rub on a UV blocker that will prevent future sun damage.
Generally, the restoration will last four to six months before some discoloration returns. However, it will not be as severe and the new oxidation will easily be removed by using the Lens Clarifying Compound. 4.
Generally, the restoration will last four to six months before some discoloration returns. However, it will not be as severe and the new oxidation will easily be removed by using the Lens Clarifying Compound. 4. Can I use the Headlight Lens Restorer Kit on other clear plastics?
Can a headlight lens be refinished more than once? Yes, a lens can be refinished several times using the 3M Refinishing System. Most lenses are made of polycarbonate material that is 1/8” to a ¼” thick. We are only removing a small fraction, less than 1/32” in most cases, from the overall lens thickness.
The bottom line is that the coating must be dry to the touch and the customer should avoid washing the car for at least 24 hours as the brushes and pressurized water will likely mar the coating.
Generally, the restoration will last four to six months before some discoloration returns. However, it will not be as severe and the new oxidation will easily be removed by using the Lens Clarifying Compound. 4. Can I use the Headlight Lens Restorer Kit on other clear plastics?
ONLY APPLY A SINGLE COAT. Repeat this process with the second wipe on the other headlight. Allow the Cerakote Ceramic Clear Coating to dry for a minimum of 60 minutes before driving or exposing them to any moisture. Note: If the Clear Coat gets on paint, don't worry.
A minimum temperature of 50°F is recommended for best results. When the ambient temperature is below 50°F, store Infinity Headlight Restoration Coating in a heated location until you are ready to use it.
