acrylic paint BEHR PREMIUM PLUS Interior Semi-Gloss Enamel Paint is a 100% acrylic paint & primer that contains an antimicrobial agent to help protect the surface of the paint film from mold and mildew. This finish resists stains, moisture and wear, provides exceptional durability, hide, and a radiant, sleek appearance.

It's a high quality, interior or exterior paint that has increased adhesion and stain blocking capability. Most high-quality interior paints when applied directly to a bare or previously painted surface will stick, cover and look similar once finished. A paint and primer in one is not designed for every project.

But we'll get into this a little bit later on in the video. So stay tuned let's jump right into some of the products. Pros.

two years Behr's water-based paints should be good for two years, says Edrosa, while Sherwin-Williams' cans boast a three-year shelf life, says Fiorilli.

BEHR PREMIUM PLUS® Oil-Based Primer & Sealer provides a mildew resistant finish and blocks stains from smoke and fire damage. It helps inhibit rust and is tintable for dramatic colour changes.

Apply when air and surface temperatures are between 50-90°F (10-32°C). Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity. Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or airless sprayer (.

Paint and primer in one is a thicker paint that builds higher to give you a sturdier coat of paint. Since it is tinted just like conventional paint, there is no need to cover up the initial layer of white primer.

In most situations, a good rule of thumb is to use a primer plus two coats of paint. If you use this rule, you may do one more coat than needed but this won't hurt the final product. There are few situations where this rule of thumb will result in doing too few coats though which is why it is prevalent advice.

While regular paint can only be used when the new shade is very close to the previous color (e.g. you can apply beige over yellow or light blue over light gray, but not white over red), paint and primer combos can be used to paint your walls a similar or a different color (e.g. blue over green).

Paint and primer combination products do work in certain situations, but every paint job is different. Paint and primer have two different, distinct functions and many times work best as two separate products. Paint provides color, hiding, sheen, scrub resistance and protection against the elements.

Behr's Premium Ultra paint is their most well-known product. Additionally, it provides substantial coverage, largely due to the paint being among the thickest on the market.

Allow at least 4 hours of dry time between coats. Dries to the touch in 4 hours at 35°F (2°C) to 45°F (7°C) and 50% humidity. Allow at least 8 hours of dry time between coats. On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats.

BEHR PREMIUM Oil-Base Semi-Gloss Enamel provides excellent flow & leveling and dries to a hard, durable finish. It provides easy stain removal and helps to protect against household chemicals.

Premium paint has better flow and leveling than low-grade paint. It applies more evenly to create a smoother finish. Premium paint also hides the original wall color in fewer coats, saving you the time and labor of additional coats.

Paint and primer in one is a thicker paint that builds higher to give you a sturdier coat of paint. Since it is tinted just like conventional paint, there is no need to cover up the initial layer of white primer.

Paint and primer in one is a thicker paint that builds higher to give you a sturdier coat of paint. Since it is tinted just like conventional paint, there is no need to cover up the initial layer of white primer.