Spray & Forget has a residual effect and actually adheres to the applied surface. In addition, Spray & Forget, unlike other cleaning methods such as pressure washing, will continue to clean long after the stains cannot be seen by the naked eye. That means that the stains will be completely removed.

For No-Rinse application, mix 5 parts water and 1 part Spray & Forget concentrate in any garden pump sprayer. When using the garden pump sprayer, add water first and then mix chemical in water. Thoroughly wet all perimeter landscaping with water immediately before and after the application.

I also used this on a wooden fence that was growing moss and mold, as it becomes wet every day from my sprinkler system. There was a very heavy buildup, and I didn't think this would work, but it did! The moss and mold is dead and most of it has been washed off by rain. The product is a little pricey, but worth it!

Wet And Forget is as simple as spraying your outdoor surface and leaving it. Green algae, black mold, and moss begin to die off on contact. The combination of the wind and the rain rinses and scrubs your surfaces clean over time. Green stains clean up in 1-2 weeks, black stains and moss clean up in 2 or more months.

Spray & Forget offers the simplest method of use! Rinsing is not required or recommended, and rain is not necessary at all for the process to work its magic on your roof.

Application: After showering, spray Wet & Forget® Shower on all surfaces to be cleaned. The next day, thoroughly rinse all treated surfaces. For best results leave on surface 8-12 hours (but no more than 24 hours). Rinse all shower and tub surfaces thoroughly before entering.

Power washing your deck, patio, fence, siding, or any other outdoor structure can brighten it up and make it look new again. And while it may be tempting to apply a new coat of stain immediately after pressure washing, most experts recommend waiting at least 48 hours before applying any new products.

In as few as 1-3 days, green stains can be eradicated! Somewhere in the range of 1-6 weeks, black stains will be diminished. When using Spray & Forget, rinsing is not part of the process! Simply spray and forget; literally!

Otherwise, it may take 2-3 months to see improvement. In the very worst case scenario, where contamination is extreme, it may take 6-12 months to work. Green stains on fencing and walkways tend to clean-up quicker than black stains on roofs or concrete.

Turn your hose. On adjust it it mixes the perfect ratio of wet and forget to water. And then as the rain. And the wind come through over the next few days and week your surface gets clean.

It would be a quick job. And the products going to keep working for us right over the winter. And in the spring. It's going to look great.

In general, it's best to apply Wet & Forget Outdoor Cleaner on a cool, cloudy or overcast day. It's ideal to apply on a day below 80ºF, to limit product evaporation. Apply Wet & Forget to dry surfaces on a day when moist conditions (rain, heavy mist, etc.) aren't in the forecast.

4-5 hours When is the best time to apply Wet & Forget? Apply Wet & Forget on a cool, dry, windless day, with no rain in the forecast for 4-5 hours. Often the evening or early morning is the best time to apply; when evaporation is minimal. This way, the treated surface stays wet with Wet & Forget for an extended period.

Spray all surrounding plants and vegetation liberally with water before and after application. Test a small area rinse and allow to dry before. Application. Apply olympic deck cleaner at full strength

After you've pressure washed your deck, you'll need to wait for it to completely dry. Sometimes, this can take as long as 48-hours. Once it's dry, you'll want to sand your deck lightly. This is necessary to remove any splinters or fuzzy patches that pressure washing can cause.

In general, it's best to apply Wet & Forget Outdoor Cleaner on a cool, cloudy or overcast day. It's ideal to apply on a day below 80ºF, to limit product evaporation. Apply Wet & Forget to dry surfaces on a day when moist conditions (rain, heavy mist, etc.) aren't in the forecast.